By: TFSP On: May 25, 2022 In: Article Comments: 0

Hardwood floors are both a blessing and a curse. They’re beautiful, but they can be high maintenance and difficult to protect. I’ve seen so many people lose their minds trying to keep their hardwood floors looking good. After trying out dozens of tips and tricks, I can say with certainty that some methods work better than others. During the consultation from experts in Floor Sanding in Melbourne, this is what they had to suggest. So that you don’t have to waste your time or money on the wrong solutions (or hurt your back in the process), here are a few surprising ways to protect hardwood floors.


Cleaning your hardwood floors is the most important thing you can do to keep them looking their best. You should regularly clean at least once a week.

The first step in cleaning your hardwood floors is to make sure that they are dry before you begin. If they are not completely dry, then you will risk damaging them by using water or other liquids on them (like soap).

Cleaning your hardwoods with a microfiber mop and vacuum cleaner will help prevent dirt and debris from sitting on top of the floor while also giving it a deep-down clean every now and then. If you do have an area that needs some extra attention, then consider using a dust mop or broom as well!

Floor Finish

Floor Finish is a great way to protect your hardwood floors. It seals the surface of your floor and prevents dirt, water, oil and other contaminants from penetrating into the wood.
When choosing a floor finish, there are several things to consider. The first is whether you want an oil-based or water-based finish. Oil-based finishes are more durable and provide more protection than water-based finishes, but they can be difficult to clean up if spilled on the flooring surface. Water-based finishes are easier to clean up, but they don’t last as long as oil-based finishes because they dry out quickly when exposed to air.

Another important consideration is whether you have enough time before applying the finish so that it has time to dry completely before walking on it again; some manufacturers recommend waiting for two weeks after application before allowing people back into areas where walls have been painted over with new colours.”

Furniture Pads

If you have hardwood floors, then you’ll need to make sure that the furniture on it is also made of wood. Otherwise, you run the risk of scratching up your beautiful floors.

To do this, simply buy rubber furniture pads for the bottom of each leg of your furniture so that they don’t scratch up your floors.

However, make sure to get the right size for each piece of furniture! If it doesn’t fit correctly, then it won’t protect your floor as well as possible.

You can find these at any store that sells home goods and tools. They’re also pretty cheap—around $1-$2 per piece depending on where you get them from. It’s worth checking out if you want to protect those expensive hardwood floors without having to spend too much money!

The last thing I should mention is how often these things break down over time due to wear-and-tear; just like regular tires on cars will eventually go flat after so many commuters across bumpy roads during rush hour traffic jams every day during springtime…

Floor Sanding

If you have hardwood floors, you’re in luck! Hardwood floors are a beautiful addition to any home and can be protected with floor sanding. Floor sanding makes your hardwood look new again while also adding a protective layer that repels dirt and grime. If you’re interested in learning more about this process, read on!

Floor sanding is the process of removing rough spots from the surface of your floor by hand or machine with abrasive grits ranging from 120-to 280 grit, depending on the amount of shine needed for each specific job. The first step is to remove furniture from the room where you will be working so as not to damage any items during this process (it can also help protect your hands). Next up is preparing for removal – make sure that all clothing has been washed and dried prior because nothing ruins a good workday like getting sawdust stuck in something it shouldn’t be stuck into!

Remove any existing finish by cleaning off excess with water-based finishes such as mineral spirits or denatured alcohol using steel wool pads (do not use steel wool after applying oil-based finishes). After everything has been cleaned off, use masking tape around doorways or other areas where there will be no cutting done so they don’t get scratched up while moving around furniture during sanding/staining processes later on down.

Floor Polishing

Floor polishing is the most important part of protecting your hardwood floors. If you don’t know how to do it, or if you have never done it before, you should ask a professional for help.
The process involves using special equipment and materials that are only available from floor care professionals. You will also need to wear safety goggles because some of the chemicals used in this process can be harmful if they get into your eyes.

You should always get professional advice about when to polish floors and how often they need to be polished, depending on what type of wood they are made out of. This can vary widely depending on where you live as well as which brand and quality of wood were used when originally installed at your home or office building/space.

Using these tools and following the tips from experts in Floor Sanding in Melbourne above should help you keep your hardwood floors looking good as new. While they may require more maintenance than another flooring, you can easily take care of them without making a large investment in time or money. If you have other questions about caring for your hardwoods, make sure to check out our other resources!