Do you have a beautiful wooden floor, but find that it is not quite perfect? By investing in a Commercial timber floor repairs company in Melbourne, your floor will look better than ever!
Often it is necessary to sand and polish the floors of a home and neglect sitting next to a filthy floor for some time, which can lead to health risks. This guide will teach the importance of cleaning the floors and making them shine bright in no time.
Introduction to Floor Sanding and Polishing
Floor Sanding and Polishing in Geelong are very tedious operations that necessitate many steps and machines. It’s best to leave the marble surfaces of floors in high-end properties to a professional contractor, but no one wants to be spending money on floor renovations when other home improvement projects are on the to-do list!
What are Floor Sanding and Polishing?
You may have done this before, but if you haven’t had your floors polished for quite a while, this requirement can be quite intimidating. You can use sanding sponges, paper towels, or the traditional sanding block to take off whatever paint or varnish has overindulged on your floor to keep it livable.
What tools are needed?
Every homeowner needs to sand and polish their hardwood floors. The process seems challenging, but in reality, it can be achieved very easily with a floor sander and a wire brush. Some woods like oak or walnut may require that you use a high-quality random orbital sander instead of the floor sander. However, once the refinishing is done, the homeowner’s pride should immediately bring an increase in home value.
How to prepare your floors before sanding and polishing?
The biggest part of floor sanding is preparation. If your floors aren’t properly prepared, you’ll just be wasting your time and money by sanding them. Here are the preparation steps you need to take:
– Remove all furniture and appliances from the room.
– Vacuum or sweep the entire room, paying special attention to the corners and edges.
– If there is any old paint or varnish on the floor, remove it. This can be done with a paint scraper or a heat gun.
– Repair any cracks or holes in the floor with wood filler.
– Sand the entire room with medium-grit sandpaper. Be sure to sand in the same direction as the wood grain.
When sanding and polishing floors, it’s important that you finish the job in one fell swoop. With floor-sanding, it is not practical to lay down a big pile of sand this way with a couple of hours off in between. Floor sanding and polishing are very crucial, hence it’s best to leave it to experts. Do proper research and choose the most reliable Commercial timber floor repairs company in Melbourne. Total Floor Sanding and Polishing has earned a reputation for specialising in timber floor staining. We have a team of professionals who examine the floor and recommend the best service to bring it back to life.
