By: TFSP On: April 17, 2023 In: Article Comments: 0

In the world of home improvements, there are few jobs that get as much attention as floor installation Melbourne. The reason is simple—a floor that’s not installed properly can be an eyesore, and even worse, a real safety hazard. That’s why it’s so important to know what to look for in a quality flooring job and how to do the work yourself if necessary.

We’ve compiled the most common mistakes people make when installing hardwood floors below so you can avoid them!

Don’t Forget the Base

The base is the foundation of your floor, so it’s important that you get it right. The base should be stable, level and dry. It should also be prepared with a layer of gravel or sand that is compacted to the correct density (about 100 psi), which will help prevent moisture infiltration through the subflooring.

Use a Stable Foundation

A stable foundation is the first step in installing a new floor. If you have an unstable foundation, it can cause the rest of your home to shift and move, which will affect the stability of your new floor.

The best way to ensure that your foundation is stable is by hiring a professional. They’ll be able to tell you if there are any problems with your current setup, and they’ll be able to recommend solutions so that everything in future projects goes smoothly.

In addition, here are some things homeowners should look out for when inspecting their own homes:

  • Make sure there are no cracks or holes in their concrete slabs–these could lead into water drainage systems underneath them (and even cause flooding).
  • Remove any debris or weeds growing around where the slab meets ground level; this will help prevent erosion over time as well as make it easier for workers during installation because they won’t have extra steps while putting down materials like adhesive tape onto uneven surfaces such as dirt patches outside where weeds may grow through cracks between boards depending on how big these gaps are between wood planks used when laying down laminate floorsing materials.

floor installation melbourne

Keep it Level

When you install your floor, it’s important to keep it level. This will make for a much more comfortable and enjoyable experience for everyone in the home.

Leveling out a floor before installing new tiles or wood can be done by using a laser level or other leveling device, as well as checking with long straight edges and spirit levels at multiple points around the room.

Leave No Space for Moisture

As you’re laying your flooring, make sure to leave no space for moisture. This includes gaps between boards and spaces under the trim. If there are any gaps, water can get in and cause damage to your floors. Water also attracts mold and mildew which will destroy wood floors over time if left unchecked.

Check for Correct Soil Type and Compaction

This is one of the most important steps in installing a new floor. If you are not sure of your soil type and compaction, it’s best to hire an expert who can test it for you. If this has already happened, there are ways to fix your problem.

If you have already installed a floor with incorrect soil type and compaction:

  • Make sure that the subfloor is level by using shims or adjusting joists (if necessary). This will help prevent future problems with warping or cracking later on.
  • Use an underlayment like plywood overtop of any uneven areas so that they don’t show through once the new flooring goes down; this will also provide extra cushioning against noise while walking around inside your house!

I hope this article has helped you understand the importance of proper floor installation Melbourne. If you’re still unsure about anything, don’t be afraid to call a professional like us – Total Floor Sanding And Polishing. Give your floors the ultimate makeover with our expert services and enjoy the perfect blend of beauty and durability for years to come!